Solver
 Solver back-end Fino v0.5.193-gfb36e2e
 Preconditioner Default (GAMG) Geometric Algebraic Multi Grid Complete LU Krylov method Default (GMRES) Generalized Minimal Residual Conjugate Gradient Preconditioned Conjugate Residuals Conjugate Gradient Squared Minimum Residual DOF ordering Default (node-based) Node-based Unknown-based Gradient evaluation Default (row-summed mass matrix for tet4 and Gauss-average for tet10) Average of the Gauss points closest to the node Average of the nodal values at the corners and average of corners and midpoints Average of the nodal values at every node Row-summed mass matrix weighted integral of shape functions Lobatto-diagonalized mass matrix weighted integral of shape functions Diagonal-scaled mass matrix weighted integral of shape functions Consistent (non-diagonalized) mass matrix weighted integral of shape functions

## Material elastic properties

 Young modulus E=$E=$$E=$ 2 GPa Poisson ratio ν=$\nu =$$\nu=$ 0.3 Density ρ=$\rho =$$\rho=$ 7.87e+3 kg/m3 Yield stress σyield=${\sigma }_{\text{yield}}=$$\sigma_\text{yield}=$ 400 MPa

## Volumetric forces

 Type None

## BC #1

 Total force acting on set of surfaces Total force in x Fx=${F}_{x}=$$F_x =$ 0 Total force in y Fy=${F}_{y}=$$F_y =$ 5 N Total force in z Fz=${F}_{z}=$$F_z =$ 0

## BC #2

 Type Prescribed displacement Displ. in x u=$u=$$u =$ 5 mm

## BC #3

 Type Fixed face Zero displacement in all directions u=$u=$$u =$ v=$v=$$v =$  w=$w=$$w =$  0

## Spatial discretization

 Meshing back-end Gmsh 3.0.7-git-898ff28d Mesh order 2 Mesh characteristic length ℓc${\ell }_{c}$$\ell_c$ 0.35 mm Nodes 90.3 k Tetrahedra 58.4 k Triangles 13 k